![TLW theLEDwheel](/img/default-banner.jpg)
- Видео 500
- Просмотров 3 261 973
TLW theLEDwheel
Канада
Добавлен 24 мар 2010
Welcome fellow RC Freaks.....
Been here for years and a lot has transpired since then.
The RC world has changed immensely in every facet but one thing has not.....
My love for RC...
Thanks for watching.
Stephan
Been here for years and a lot has transpired since then.
The RC world has changed immensely in every facet but one thing has not.....
My love for RC...
Thanks for watching.
Stephan
Blink Sync Module 2 Wall outlet mounting system system for 3D Printers
I was surprised to see there was no casing or mounting system that came with the Blick Sync unit and Didn't really like the ones available online so made one.
The File is available here -
cults3d.com/:2069597
3D files
TLW3D.com
Join us on "theLEDwheel" facebook page
groups/TheLEDWheel2.0/
Twitter
MacPhreak
And Blogger
theledwheel.blogspot.ca
Thanks for watching
Steph
"music by Karl Casey @ White Bat Audio".
The File is available here -
cults3d.com/:2069597
3D files
TLW3D.com
Join us on "theLEDwheel" facebook page
groups/TheLEDWheel2.0/
MacPhreak
And Blogger
theledwheel.blogspot.ca
Thanks for watching
Steph
"music by Karl Casey @ White Bat Audio".
Просмотров: 64
Видео
Redcat Ascent Fusion Review(NOT) Thoughts and a Pet Peeve Right out of the box
Просмотров 2803 месяца назад
www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph Music music.skullofskill.com
Tamiya TT 01 Stock Steering arms Bearings Hack Mod
Просмотров 2243 месяца назад
RC Stuff and more s.click.aliexpress.com/e/_DlyiMMn Bearings available here s.click.aliexpress.com/e/_Dn5bPhV 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph "music by Karl Casey @ White Bat Audio".
Tamiya TT01- Testing a downloaded Bulkhead STL file for 3D printers and then redesign
Просмотров 1513 месяца назад
www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Direct link to this STL File cults3d.com/en/3d-model/game/tamiya-tt01-bulkhead-gearbox-cover-with-shock-tower Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
How to assemble the Cults3d TLW3D RC 1/10 scale Mezzanine for Garage or diorama.
Просмотров 1055 месяцев назад
www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades the files can be purchased here. cults3d.com/:1005647 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
RST Toygrade Mods update not so good
Просмотров 2779 месяцев назад
www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
Just purchased a small RC lot of some great oldies
Просмотров 1729 месяцев назад
Had to share my current finds... www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
RST(Radioshack truck) Brushless upgrade Radioshack Hummer No 60-4358
Просмотров 6809 месяцев назад
Back to upgrading toygrade RC's with Hobby grade electronics. So far in this Radioshack truck we have installed a Brushless motor and better servo. No idea if it will take the abuse of a brushless motor but thats part of the fun. www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades Music provided by TheRelaxedMovement. Check it out here: ruclips.net/user/TheRelaxedM... © Henry Keat...
Projects update, so much to do, so little time
Просмотров 1219 месяцев назад
www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
Fun races in Ottawa September 24 2023 - Short course and on road
Просмотров 8010 месяцев назад
Was nice afternoon racing with the boys in Ottawa. www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades FREE Instrumentals/Beats by Aim To Head. ⬇️MP3 FREE DOWNLOAD⬇️ drive.google.com/file/d/1jUDZ... ⬇️ Copyright Free Music Playlist ⬇️ open.spotify.com/playlist/3fQ... 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter M...
Printing RC Replacement parts Tamiya FF01 Gear Case off of Cults3d
Просмотров 29610 месяцев назад
Link to the Files on Cults cults3d.com/:153678 www.asiatees.com/store?rc_pal=3335313136 for ALL your RC Upgrades 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph
New Project Pajero(Now a Nissan) Belly Dragger 9 - Run on the rocks
Просмотров 54410 месяцев назад
Took the Hardbody out for a little drive on the rocks at Wilson Falls, St Jerome Quebec. Motor s.click.aliexpress.com/e/_DkWv1Gd ESC s.click.aliexpress.com/e/_DFj0BNX Shock Towers s.click.aliexpress.com/e/_DFLTFvB Drive Shafts s.click.aliexpress.com/e/_DFLdiJJ Axles s.click.aliexpress.com/e/_DB9bx9n Links asiate.es/aff?l=123870&i=35116 Shims asiate.es/aff?l=68476&i=35116 3D files TLW3D.com Musi...
New Project Pajero(Now a Nissan) Belly Dragger 8 - Stewart Warner Livery
Просмотров 16011 месяцев назад
Sooooooo, in the end we changed a lot but we now have a good looking 80's Nissan Hardbody with the Stewart Warner Budweiser Livery, Motor s.click.aliexpress.com/e/_DkWv1Gd ESC s.click.aliexpress.com/e/_DFj0BNX Shock Towers s.click.aliexpress.com/e/_DFLTFvB Drive Shafts s.click.aliexpress.com/e/_DFLdiJJ Axles s.click.aliexpress.com/e/_DB9bx9n Links asiate.es/aff?l=123870&i=35116 Shims asiate.es/...
New Project Pajero Belly Dragger 7 - Lets change it up again
Просмотров 14811 месяцев назад
Motor s.click.aliexpress.com/e/_DkWv1Gd ESC s.click.aliexpress.com/e/_DFj0BNX Shock Towers s.click.aliexpress.com/e/_DFLTFvB Drive Shafts s.click.aliexpress.com/e/_DFLdiJJ Axles s.click.aliexpress.com/e/_DB9bx9n Links asiate.es/aff?l=123870&i=35116 Shims asiate.es/aff?l=68476&i=35116 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter twitter.co...
A little crawling event hosted by Wag At Bernie's August 2023 - Trois Rivieres Quebec
Просмотров 1,2 тыс.11 месяцев назад
my 3D files TLW3D.com Join us on "theLEDwheel" facebook page groups/TheLEDWheel2.0/ Twitter MacPhreak And Blogger theledwheel.blogspot.ca Thanks for watching Steph Music provided by TheRelaxedMovement. Check it out here: ruclips.net/user/TheRelaxedM... © Henry Keate t/a TheRelaxedMovement. All Rights Reserved
New Project Pajero Belly Dragger 6 - Tuning and greasing the portal axles(good for any axles)
Просмотров 138Год назад
New Project Pajero Belly Dragger 6 - Tuning and greasing the portal axles(good for any axles)
New Project Pajero Belly Dragger 5 - Pretty much changed everything(ALMOST)
Просмотров 434Год назад
New Project Pajero Belly Dragger 5 - Pretty much changed everything(ALMOST)
New Project Pajero Belly Dragger 4 - Sometimes things don't go as planned
Просмотров 167Год назад
New Project Pajero Belly Dragger 4 - Sometimes things don't go as planned
New Project Pajero Belly Dragger 3 - Making links and using the Wheelbase Jig
Просмотров 119Год назад
New Project Pajero Belly Dragger 3 - Making links and using the Wheelbase Jig
New Project Pajero Belly Dragger Part 2 - Making an adaptor by hand - Motor/ESC/Links
Просмотров 191Год назад
New Project Pajero Belly Dragger Part 2 - Making an adaptor by hand - Motor/ESC/Links
Project Short Wheelbase Pajero Belly Dragger (hopefully high performance)
Просмотров 205Год назад
Project Short Wheelbase Pajero Belly Dragger (hopefully high performance)
RC scale Adjustable Wheelbase link configuration jig
Просмотров 253Год назад
RC scale Adjustable Wheelbase link configuration jig
3D printed VW Pickup Drift/Street truck - Links to files in description.
Просмотров 233Год назад
3D printed VW Pickup Drift/Street truck - Links to files in description.
1/10 scale 3D Printable Modular Mezzanine for scale Garages/Diorama.
Просмотров 493Год назад
1/10 scale 3D Printable Modular Mezzanine for scale Garages/Diorama.
Little Showcase for some new 3D printed items for 1/10 scale garage on Cults3d
Просмотров 207Год назад
Little Showcase for some new 3D printed items for 1/10 scale garage on Cults3d
Marui Big Bear Clod Buster Project - a 1/8 scale of a vintage classic
Просмотров 655Год назад
Marui Big Bear Clod Buster Project - a 1/8 scale of a vintage classic
3D Printed RC4WD Blazer Hinged Tonneau Cover
Просмотров 3482 года назад
3D Printed RC4WD Blazer Hinged Tonneau Cover
The Gallery - GCM Adventure Series at Warsaw Caves June 17-19 2022
Просмотров 1642 года назад
The Gallery - GCM Adventure Series at Warsaw Caves June 17-19 2022
Vanquish VS410 Phoenix... Reason for the unpainted hood.
Просмотров 2,3 тыс.2 года назад
Vanquish VS410 Phoenix... Reason for the unpainted hood.
Recently i brought a Remote control car online and play Yesterday. I accidently bang into the wall at the void deck, the car stopped but it still can but move but it will stop. Now the black wire came out, it can't move at all. I suspect must be the motor's wire. But the power and steering seem fine.
@@Japanophile95 what RC is it?
@@TheLEDwheel Subaru Impreza R/C 2.4G, 1:10 Scale, but the wire for connecting the motor is insert not clip.
@@Japanophile95 what brand
@@TheLEDwheel V-Max 30
@Japanophile95 hmm, can't seem to find info on it. Where did you buy it? Do you have a link? Is the wire disconnected from the motor or ESC?
So my situation is that the servo works and my new motor doesn’t so did what you said and so the servo works with the throttle but the motor doesn’t work with the steering so is the ecu bad? because it doesn’t work with the throttle?
@RainerKelly if the servo works on both channels then the RX is good. Your ESC or Motor may be faulty. What's the motor and ESC? Is it brushed or brushless.
@@TheLEDwheelthe esc and the motor is a brushless setup but I got the esc from my friend and idk how old it is so it probably might be the esc
@@RainerKelly do you have another one to try.
@@TheLEDwheelno, but I shall go buy one
Bonjour j'ai un problème sur ma boîte de vitesse elle tourne mais sans mes roues 😢
@@SWC_TITI a tu adjuster le selecteur de vitesse?
@@TheLEDwheel c'est à dire ?
@SWC_TITI s'il s'agit d'une transmission ex real, elle a deux vitesses. il est possible que le sélecteur se trouve entre les gears..
@@SWC_TITI regarder dans le Manuel.
@@TheLEDwheel oui c'est ça mais lorsque je remets correctement après ça se remet au milieu et donc ça tourne dans le vide
In my case one channel , my right aileron, was not operating but the left one was normal. so i switched positions on the receiver and the right one worked, but the left did not. ….so this would indicate the receiver and servos are ok. So this is a tx setting problem ? if so what am i missing ?
@KenastonKid could still be the rc or TX. Only way to rule that out is another TX or rx to test with.
Hey brethren, I have a redcat Ascent and I replaced a motor, now it wont steer or run at all but esc light is on.
@@REightch do you know if the RX is getting power from the ESC?
Gotta love RUclips. My dad got one of these for $25 bucks and thinks it's so cool he wants it converted to hobby grade electronics. I'm very grateful to see a teardown of the front diff case and servo install, that to me looks like the hardest part.
Been trouble shooting my sons RC. It started with no response in steering. I checked it out, and the servo had sand around it. I replaced the servo, and the new one had a steering response, but randomly didn't respond to left turns and would twitch. The company sent a replacement that has random no response also but the servo will twitch if I tap on the top of the controller.
Could be a loose connection, but was this mentioned to the manufacturer/seller?
Maybe a smaller diff output cup with the 3 racing universal shafts, have you also tried one of the little clear donut washers in the diff output cup to buffer the universal shaft? When turning that far it sometimes creates a space between the back of the diff output and the dogbone on the uni shaft
Chances of someone breaking the chassis is 99% not going to happen unless there doing ridiculous jumps.
I beg to differ and seen it many times.
Ok what if your ESC does not respond unless re "binding" the remote every time you turn you car on?? I have a hpi savage xl and I fixed a couple things then after putting it back together I turn it on, no beeps from the ESC.... Turn the remote off and hold the bind button and turn it back on it then beeps. Wait 2 or 3 minutes it works?
I've had a receiver do this. I needed to rebind it every time. It still worked well, but I ended up changing the radio set completely as the receiver in question was no longer available.
I’m 43 had this when I was 8 or 9
Thank you for doing this upgrade build. Its helped renew my confidence in this project im doing 😁
Both of them doesnt work and my remote works with other rc cars
That means microcontroller is receiver?or something else?
It could be.
This is awesome I miss mine when I was a kid bought it new from RadioShack 🖤
creí que era el único que había tenido problemas con esa dirección, ningún servo me lograba funcionar, le hice un injerto al antiguo servo y quedo genial, una lastima que el tulló no se pudo salvar, gran video por cierto.
I love mine took it to the river and surprised the crap out of me now I have to inspect my ball links....thanks 🤣
Please do check. Be good to know if its just mine.
My Ex-Real has about 2-3 mm axle play from new. Any suggestions on how to reduce that. Thanks. Love your channel.
Odd that mine does not, even after years of use. Just make sure the play is not due to the ball links moving in their mounting points. Like in the skid plate, move them and pay attention to what exactly is loose. The ball in the ball end or the ball on the screw/mounting point. I'm not sure that's clear..
@@TheLEDwheel Will inspect that carefully. Thank you sir.
Great tip
Nice a red cat at the beginning of the video and a black cat at the end
So... Um why didn't it last
I got this for Christmas. I was pumped. One of tycos better RC cars .
❤🏆👑😍🤩👏😇😎🔥👍🌞
Very nice, looks like a must do mod.
Seeing as the steering arm sits on the flange of the bearing why not drill all the way through. Also counter sunk screws work better to secure bearing as they don't bind on side of bearings
Agreed, but drilling all the way would weaken it way more than it needed to be. Also, for the screw type, the socket cap kind of hides the bearing, making it look like there's just a washer underneath. Therefore, it looks stock ish. If i had longer zinc type phillips i would have used those. All in all it works well.
Great video. This is just what was needed. Thanks for the video
Hi, is it doable to put/replace the stock axlex with other brand axles in this kit? Since it's already discontinued, I'm afraid I'll broke mine especially the axles. Thanks
I abused mine and its still good but yes there is always a way to modify it. Just have to find the right width and then fit it to the chassis. But some adaptations/mods will most likely be needed. Boom racing might have axles that fit width wise. Otherwise maybe Injora!?
@@TheLEDwheel thanks for the reply, my main concerns is there's a click sound in rear axle and idk what's the noise is, not from gearbox area but around rear axle, I'm thinking about change the whole axles if there's no hope for the parts. I'll go check on the BR axles, thanks 👍
You can still get parts, and they are fairly cheap.. os.3racing.hk/car_parts.php?carkits_key=152
@@TheLEDwheel i forgot there's a official store, I'll use this as last resort, thanks
Have fun
Tables? You mean control arm?
Same
What is wrong with my RC? The wheels won’t turn.
As in, the steering won't turn, or the wheels won't spin?
The Front and rear light do not light up on my RTR
How long have you had it? And what is it?
dommage que vous ete fermer a moin que vous avez juste changer de place?
Cest pas a moi mais pas mal sur cest fermé.
Hey, im in need of one of these chassis, wondering if you could do a 1 off print for me as I don't have a 3D printer, Im in the UK too so would you be able to do delivery?
I can, but what do you mean by "one off"? And yes, i can ship.
Does it have a 380 or 390 motor
540 trinity Midnight
I want to buy like it from where
It's pretty much out of stock everywhere. You would have to keep looking around on ebay and classified sites for it. Look for tamiya 58627 or by its model name.
Nice job upgrading the motor to brushless. I too acquired this RS Hummer H2 and upgraded the electronics - not the motor, to modern parts on my channel. Mine even came with the Mattracks!
I’m finding this video years later but I have an axial smt 10 on stock electronics and remote and the remote won’t pair at all is it the receiver?
Only way to find out is to try another receiver if it works, it was the receiver, if not its the radio. Assuming you are doing the pairing procedure correctly of course.
@@TheLEDwheel the radio has a rapidly blinking red light on it and I recently had to take it apart to fix a broken steering mechanism and since it hasn’t worked
That is important info. Check that your antenna is still connected inside the transmitter . Maybe try something. While binding, bring the receiver as close as possible to the transmitter antenna base area. If it binds, you possibly have a broken antenna wire.
@@TheLEDwheel do you have another way I can maybe get in touch with you like maybe Instagram?
Yo he tenido varios modelos de esos pero la corona se parte porque no viene hecha de acero asi que rapido dejaron de servir no soportan el poder de ese motor
Looks great, great idea.
Looks amazing wish I had a 3D printer
The reason why i want aluminium is because of the colour just pops more than the plastic. Saying that i will not be doing so. This might be stupid to some people but i have done it and works perfect. Just strip the plastics you want aluminium and plastic spray paint them. Looks just as good. Only problem is they can scratch if you are on gravel, stone ect. For me its perfect as i only drive mine on grass so no scratches.
Hey, man! Do you have a long-term assessment of the axles? I am about to replace my Yota 2 axles with these(on my Gelande 2), and I am torn between these and full BRX90 axles.
I still have them. I replaced a rear axle shaft after a major fall bent it and the bushings in the steering knuckles. They are just awesome. Either way you go with boomracing, i think you will be pleased
@@TheLEDwheel Thank you for the reply! I am hoping these will serve my Gelande well.
I had this
I'm starting to do this to a red '86 turbo hopper. Thanks for putting this vid together, your work is making mine that much easier.
This is what we all imagined it would be like when we saw those commercials.
Tu fini sa quand?
Je l'ai meme pu. on ma fait un offre pour.. lol
The issue im having is intermittent reverse i have slide adjustment if i go full reverse on the slide i can get it to work but it doesnt work for long? Any ideas?
Have you tried another ESC?
Did you ever get this up and running smoothly? Interested in the stls if you did
no not really, I'm very bad at getting these things done lately. So many things to get back to. I have been eying it more though. Thats a start right?
The shock towers are the weak points. That's what took mine out back in the day. Just hit a rock ripping around a parking lot and it snapped it.
Can you also show me how you put the 3s Lipo on your New Bright Ford F-150 pls :D 🎉
I no longer have this rc but I am pretty it was simply strapped onto the back area.
Awesome Video and the music choice is Awesome :D :D 🎉 🎉